5.5 Warranty
The producer assures the customer a warrantee term which is foreseen in the contract of
purchase.
The customer will lose his rights on warranty, if he does not comply with the terms of
payment (even only one), or if the breakdowns are caused by the customer himself, his
employees or others, through: an improper installation (if not made by the manufacturer),
inexperience in handling the machine, improper use, bad maintenance, modifications,
mending, changes or tampering made without an authorization by the manufacturer.
The warranty decays if non original spare parts are used by the customer (including the
tools and the retaining pins for the tool).
All those parts subject to wear and tear, are excluded from warranty.
The warranty, which the producer must grant by law, is limited to the change and mending
of parts damaged by the manufacturer himself and this at his own choice.
The report on possible faults must be done by the customer, within 8 days, by registered
letter. No compensation for damages is due to the customer.
The faulty parts must be sent to the supplier’s factory, carriage free, in order to be
inspected and eventually changed or repaired under warranty.
Where the installation is made by the manufacturer, any damage provoked to the
customer or others, during the installation, falls on the customer’s responsibility.
To Next Page
Loading...