SodaStream enso - Create the Bubbles

Note: When inserted correctly, there is a small
gap between the bottom of the Plastic
Carbonating Bottle and the base. Do not
carbonate if the Plastic Carbonating Bottle is
resting on the base, or water will splash out.
CARE
2
1
CREATE THE BUBBLES
Check for compatibility on the bottle pack.
SodaStream
®
plastic carbonating bottles
1L 1L0.5L1L
A
B
3 4
1
2
Note: You may see small
pieces of ice appear in
the water during
carbonation of very
cold water. Any ice
created will simply melt.
4
x3 x5
3
A
B
1. Fill the plastic carbonating bottle with cold water up to the fill
line. WARNING! Do not carbonate anything other than water.
Other liquids can contaminate and clog internal parts,
potentially resulting in excessive pressure, bottle failure
during carbonation and serious injury. Never carbonate after
flavoring has been added.
2. To insert the plastic carbonating bottle make sure that the
bottle rest is angled forward. Please make sure you do not pull
the carbonating tube. WARNING! Never use a Sparkling Water
Maker with a broken carbonating tube. This can cause
excessive pressure, bottle failure and serious injury. Insert the
Plastic Carbonating Bottle neck into the Snap-Lock system.
Push the Plastic Carbonating Bottle up and back. The
Snap-Lock will hold the Plastic Carbonating Bottle.
3. To carbonate, press the carbonating button in short 1 second
presses; 3 presses for standard carbonation and 5 presses for
strong carbonation.
4. When the desired level of carbonation is achieved, gently pull
the plastic carbonating bottle towards you until it reaches its
fully forward position. This will release the pressure in the plastic
carbonating bottle and allow the plastic carbonating bottle to
be released from the Snap-Lock.
WARNING! Do not remove Plastic Carbonating Bottle until after
hearing the sound of excess CO being released. Never force the
Plastic Carbonating Bottle out of the Snap-Lock. Always allow the
Sparkling Water Maker to release the Plastic Carbonating Bottle. If
the Plastic Carbonating Bottle does not immediately release, then
push the Plastic Carbonating Bottle back into the vertical position
and gently pull it towards you again. Attempting to remove the
Plastic Carbonating Bottle while it is still pressurized can cause
uncontrolled ejection of the Plastic Carbonating Bottle and may
result in serious injury.
ONLY COMPATIBLE WITH THE FOLLOWING PLASTIC BOTTLES:
6
SPARKLING WATER MAKER CARE
If you have high polished stainless steel enso:
1. Never use abrasive cleaners or sharp tools to clean. To
make your Sparkling water maker shine like new, use the
special leaning cloth supplied with the machine. You can
also use stainless steel cleaning agents for home
appliances.
2. Remove the drip tray and wipe spills to keep base dry. Drip
tray is dishwasher-safe.
3. Do not place your Sparkling Water Maker in water or wash
in a dishwasher, doing so will seriously damage your
Sparkling Water Maker.
If you have high polished copper enso:
1. Never use abrasive cleaners or sharp tools to clean. To
make your Sparkling water maker shine like new, use the
special cleaning cloth supplied with the machine.
2. DO NOT use stainless steel cleaning agents for home
appliances.
3. Remove the drip tray and wipe spills to keep base dry. Drip
tray is dishwasher-safe.
4. Do not place your Sparkling Water Maker in water or wash
in a dishwasher, doing so will seriously damage your
Sparkling Water Maker.
If you have Matte Black enso or Matte Sand enso:
1. Never use abrasive cleaners or sharp tools to clean. If needed, use a mild liquid dish soap and a soft damp
cloth to gently clean.
2. Remove the drip tray and wipe spills to keep base dry. Drip tray is dishwasher-safe.
3. Do not place in water or wash in a dishwasher, doing so will seriously damage your Sparkling Water Maker.