AMASSTORE GTX5000 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
5.2.1 Start Button
Start button integrated LED status Indicators, to show Battery running status or
warning status.
1、Press start button more than 3s and then release the button, LED will lights
from L7 to L1, and then enters to automatic coding, all LED lights flash and L7 is
shown as purple. After the automatic coding, L1 to L6 shows the normal capacity,
and L7 shows the running status:
L7: Blue, long lighting when charging and flash when discharging;
L7: Red, long bright if equipment failure or protected.
2、In parallel system, connect the parallel communication wiring according to
section 5.3.1, then long press the start button of the Master PACK, after normal
startup, the battery system will automatically encode and assign ID to each
parallel PACK, and then the parallel system will run normally.
3、Press start button of Master PACK more than 3s and then release the button,
LED will lights from L1 to L7 to shut down the battery module. In parallel system,
the master pack will shut down after all slave packs shut down.
To Next Page
Loading...