Sofar solar AMASSTORE GTX5000 - Communication Ports (CAN;RS485)

AMASSTORE GTX5000 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
20
system will run normally(refer to section 5.2.1).
5.3.3 CAN / RS485 Port
CAN / RS485 Communication Terminal(RJ45 port) follow CAN protocol / RS485
protocol, connect to communication port.
1、 BMS controls the charging current/charging voltage or discharge
current/discharge cut-off voltage of the PCS through CAN communication
according to the battery voltage and battery temperature.
2、 If the battery capacity is less than 8%, BMS controls the PCS to make
compulsory recharge through the CAN communication to avoid the damage
of the battery due to deep discharge.
3、 If SOC was less than 97% for one consecutive month, BMS controlled PCS
by CAN communication to full charge the battery to corrected SOC and fully
charged capacity.
Note: Through the Sofar Solar PCS, skilled peoples can set the fully charged
time period, which is from 3AM to 6AM by default.