The above mentioned parameters are based on tests according to international flashlight testing
standards (ANSI/NEMA FL1) using the 440mAh polymer battery. Results may vary with different
battery or under different environmental conditions.
Specifications
A super bright and powerful LED
Working Voltage: 2.7V - 4.2V
Battery: the built-in polymer battery
Dimension: 70mm (length) × 23mm (head diameter)
Weight: 27g
Flashlight body: 6061-T6 aluminum alloy and PC
TIR lens
Standby electrical current: ≤35uA
Charging specifications: 5V/0.4A
IP68 Waterproof
USB Type-C Charging
Spot light angle: 19.2
°
, flood light angle: 90
°
LVP: while the flashlight is on, it turns off automatically when battery voltage is lower than 2.7V.
If battery doesn’t have enough power when turn on, the LED indicator will flash red to signal critical
power.
Power Indicator
The battery level indicator shows the power status for 5 seconds after you turn the flashlight on.
Green = remaining battery level is good. (70-100%)
Red = remaining battery power is poor. (30%-69%)
Flashing Red = critical battery level, please replace or recharge the flashlight as soon as possible.
Charging
SC02 features a USB-C charging port for convenient charging. Please connect it with the included
USB-A to USB-C cable and use a USB power adapter (not included). The flashing red indicator means
charging, while the green indicator means charging completed.
Operation Instructions
To Next Page
Loading...
