Software House RM2-SE User Manual

Overview
2
Supported Technologies and Card Formats
The RM SE Multi-Technology reader offers full HID® iCLASS® support,
including legacy iCLASS, iCLASS SE®, and iCLASS SEOS™ cards, and the
ability to read the encrypted PACS data from these cards. The reader also
supports reading serial numbers from MIFARE® and will read most 125 KHz
formats (HID and CASI ProxLite).
Proximity (125 KHz) Formats Supported
 HID 26-Bit
 HID Corporate 1000 (35-bit and 48-bit)
 HID 36-Bit Wiegand
 HID 37-Bit Wiegand
 Other HID Pass-through Formats
 (GE) Casi Rusco ProxLite
Smart Card (13.56 MHz) Formats Supported
 MiFARE Serial number, 32-Bit
 Legacy iCLASS
 iCLASS SE PACS Data
 iCLASS SEOS PACS Data
Table 1: Reader Model Part Numbers
Description Part Number
Reader with no keypad or LCD; with built-in RM-4 DS interface board RM1-SE
Reader with keypad; with built-in RM-4 DS interface board RM2-SE
Reader with keypad and LCD; with built-in RM-4 DS interface board RM2L-SE
NOTE
 The RM Multi-Technology reader can be used to transition from a proximity system to a
more advanced smart card system gradually over time, or to maintain the existing
proximity card system while moving selected personnel to smart cards.
 UL has not evaluated Smart Card technology with this unit.
 UL has evaluated the Wiegand Proximity (26-bit only) card format for this unit.
 UL has not evaluated encryption.

Software House RM2-SE Specifications

General

Brand	Software House
Model	RM2-SE
Category	Rfid Systems
Language	English