Sojag 500-6160680 User Manual

Assembly Manual
BBQ shelter 6 x 8 ft.
Overall dimension:(including side shelves) 71 x 115 inch
Min. dimension required for the base: 70 x 96 inch
Sojag code: 500－6160680
UPC code: 772830160680
Guide d’assemblage
Abris BBQ
1.8 x 2.4 m
: 178.7 x 243.6 cm Dimension min. requise pour la base
Dimensions hors tout:(incluant les tablettes) 180 x 292 cm
Code Sojag : 5006160680
Code CUP : 772830160680
© Sojag inc. 2016
Hard Top Sun Shelter
ITM. / ART. xxxxxx
Assembly Instructions
IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
Consult with your local governing authority / local municipality codes regarding
installation of temporary structures before assembly. Some jurisdictions may
require permits for, or otherwise regulate, installation and use.
For parts and customer service, please call 1-866-901-1649 in Canada and U.S.
(English and French) Monday to Friday , from 8:30 AM to 4:30 PM, EST.
Abri-soleil à toit rigide
ITM. / ART. xxxxxx
Instruction d’assemblage
IMPORTANT : GARDER POUR RÉFÉRENCE FUTURE, LIRE ATTENTIVEMENT
Veuillez consulter vos autorités municipales avant de compléter l’assemblage
d’un abri temporaire. Certaines municipalités demandent un permis
ou réglementent l’installation ou l’utilisation de l’abri.
Pour contacter le service à la clientèle ou pour commander des pièces,
composer le 1-866-901-1649 au Canada et USA (français et anglais)
du lundi au vendredi, de 8 h 30 à 16 h 30, HNE.

Sojag 500-6160680 Specifications

General

Brand	Sojag
Model	500-6160680
Category	Outdoor Furnishing
Language	English

Summary

Sojag BBQ Shelter Assembly Manual

Introduction and Safety Information

Provides initial guidance, safety precautions, and contact details.

Hardware Kit Overview

Lists all fasteners, tools, and quantities required for assembly.

Main Structural Components

Details structural elements like columns, panels, and roof bars.

Frame and Connector Parts

Lists frame supports, finishing pieces, and connectors.

Roof Panel Identification

Catalog of various roof panels and associated brackets.

Step 1: Base Assembly

Attaching the base supports to the main columns.

Step 2: Main Frame Construction

Connecting uprights and horizontal beams to form the shelter frame.

Step 3: Corner Reinforcement

Securing the corners of the main frame with fasteners.

Step 4: Corner Cover Installation

Attaching decorative corner covers to the shelter frame.

Step 5: Gap Cover Installation

Fitting cover bars to close gaps in the roof structure.

Step 6: Roof Support Assembly

Connecting roof side structures and connectors.

Step 7: Roof Structure Attachment

Integrating roof supports with the main frame.

Step 8: Finishing Bar Installation

Adding finishing bars to the roof edges for a clean look.

Step 9: Roof Panel Preparation

Preparing and aligning roof panels with brackets.

Step 10: Roof Panel Placement

Positioning and securing the main roof panels.

Step 11: Internal Roof Support

Adding internal bracing for the roof structure.

Step 12: Roof Connector Fitting

Installing external and internal roof connectors.

Step 13: Upper Roof Assembly

Attaching the components of the upper roof section.

Step 14: Outer Roof Panel Alignment

Positioning the exterior roof panels correctly.

Step 15: Decorative Panel Mounting

Attaching decorative panels on the shelter supports.

Step 16: Bracket Installation

Securing structural brackets to the shelter frame.

Step 17: Shelf Attachment

Installing the side shelves onto the frame.