Sojag Verona User Manual

Assembly Manual
Sunshelter 10 x 14 ft.
Exact dimension of the roof, corner-to-corner: 116.4 x 166.6 inch
Min. dimension required for the base: 113.9 x 163.3 inch
Aufbauanleitung
Pavillon Verona 10x14 300 x 422 cm
Maße Dach : 295,5 x 423 cm
minimale Fundamentmaße : 289,2 x 415 cm
© Sojag inc. 2015

Sojag Verona Specifications

General

Brand	Sojag
Model	Verona
Category	Outdoor Furnishing
Language	English

Summary

Step 1: Install Columns

Install Column (A) on Base (H) with Screws (V)

Attach each column to its base plate using the specified screws.

Step 4: Attach Ogees to Columns

Install Long Ogees (C/C1) Between Columns (A)

Attach long ogees to columns using outer, inner, and final screws.

Install Short Ogees (B/B1) Between Columns (A)

Attach short ogees to columns using outer, inner, and final screws.

Step 6: Attach Solidifying Bars

Attach Solidifying Bar (K2) to Inside Corner

Secure a solidifying bar to the inside corner with screws.

Attach Solidifying Bar (K) to Ogee and Column

Connect a solidifying bar to the ogee and column with screws.

Step 7: Install Corner Roof Bars

Install Corner Roof Bars (D) to Inside Roof Connector (S1)

Attach the four corner roof bars to the central inside roof connector.

Step 8: Position Roof Structure

Place Roof Structure on Top of Ogees

Position the assembled roof structure onto the top of the ogees.

Screw Corner Roof Bar (D) to Column (A)

Fasten each corner roof bar to its respective column with a screw.

Step 9: Attach Middle Roof Bars

Attach Six Roof Bars (E) to Inside Roof Connector (S1)

Connect the six middle roof bars to the central inside roof connector.

Screw Six Roof Bars (E) to Ogees (B,B1,C,C1)

Secure the middle roof bars to the ogees using screws.

Step 11: Install Roof Panels

Install Left Roof Panel (Ma) and Right Roof Panel (Na)

Insert Middle Roof Panels (Z)

Step 12: Install Roof Support Bars

Install Roof Support Bars (J, J1, J2)

Step 13: Install Middle Roof Panels

Install Left Roof Panels (Mb) and Right Roof Panels (Nb)

Insert Middle Roof Panel (Z1)

Step 15: Install Solidifying Bars

Install Solidifying Bars (G) Using Screws (V)