Sol Welding FUTURA Series User Manual

FUTURA 3500 C
FUTURA 4500 C
FUTURA 3500 S
FUTURA 4500 S-W
FUTURA 5500 S-W
WIRE FEEDER TR 21
FUTURA SERIES
Instruction Manual
Betriebsanleitung
Livret d'Instructions
Manuale Istruzioni
Manual de instrucciones
Sol Welding
The present manual must be integrated by ”Operating ad service manual CE”
Diese Bedienungsanleitung muß durch die “CE Betriebs- und Wartungsanleitung” ergänzt werden.
Ce livret doit être completé avec le "Manuel d'usage et entretien CE"
Il presente manuale deve essere integrato dal ”Manuale d’uso e manutenzione CE”
El presente manual debe ser acompañado por el “Manual de uso y mantenimiento CE” Printed in date 21/04/08 Rev. 00

Sol Welding FUTURA Series Specifications

General

Input Frequency	50/60 Hz
Efficiency	85%
Welding Processes	MMA, TIG
Duty Cycle	60% at Max. Current
Protection Grade	IP23

Summary

Possible Applications

Applications and Limitations

Details suitable MIG/MAG welding applications and cable length limits.

Routine Maintenance

Machine Adjustments and Features

Component Descriptions (POS. 1-26)

Front Panel Controls

Details controls and indicators on the welding machine's front panel.

Power Supply Connection

Electrical Connection Safety

Emphasizes that only specialized electricians should perform power connection operations.

MIG Installation and Setup

Wire Feeder and Workpiece Connection

Guides on connecting the wire feeder and workpiece to the machine.

Torch and Cooling System Connection

Wire Feeding Setup

Welding Power Adjustment

Wire Speed Adjustment

Wire Speed Control

Instructions on how to adjust and monitor wire speed using controls and displays.

Torch Switch Cycle Selection

Timer Settings

Burn Back Time (BBT) Adjustment

Soft Start Adjustment

Technical Specifications