Sola Go! SMART - Changing Measurement Display and Resolution; Bluetooth Connectivity

EN
6.6 Changing measurement display
Press "Mode button° / mm / m /% / in / ft / on / o switch acoustic" (Signal at 0 ° and 90 °) to
switch between ° / mm / m /% / in / ft.
6.7 Changing the display resolution
Press the "Hold function" and the "On/O switch / Dislpay light" button at the same time to change the
resolutions between: 0.00° and 0.0°.
6.8 Bluetooth
Fast and ecient data transfer of measured values can be made directly to a smartphone via Bluetooth.
NOTE
To pair with a smartphone, launch the SOLA measures app and connect using
one of the function options.