11
en
MAIN COMPONENTS Fig. 1
2 MAIN COMPONENTS Fig. 1
1 Switch with mains pilot light
2 Coffee extraction and de-pressurisation selector
3 Switch with steam warning light
4 Filter holder
5 1-cup filter (and for single-dose pod)
62-cups filter
7 Water tank
8 Steam nozzle control
9 Steam nozzle
10 Steam nozzle protector
11 Water level viewer
12 Coffee outlet holes
13 Cup-holder tray
14 Tank lid
15 Filter container
16 Dispenser spoon
3TIPS
• Before using the coffee machine for the first time, we recommend
allowing the equivalent of 8-10 cups of water to run through the filter
holder (with no coffee in the filter). This completely cleans the entire
system.
• Use the dispenser spoon (16) to adjust the correct amount of coffee. One
spoonful is equivalent to one cup of coffee.
• If the coffee seems to be coming out too slowly, the grind is too fine. We
recommend that you avoid using extra-fine ground coffee.
4 OPERATION
A. COFFEE
a. Preparing coffee
1 Fill the water tank. To do this, remove the tank (7) from the rear of the
coffee maker or open the lid (14) and pour the water in.
2 Plug the coffee maker into the mains and press the switch (1). The
orange pilot light will come on and change to green once the appliance
is ready to make the coffee.
To Next Page
Loading...
Need help?
General
