21
E) ENERGY SAVING
Sequence Press the button Message on screen
1. The coffee-maker is ready.
2. Press the ‘P’ button to enter the programming menu.
3. Press the ‘>’ button until the ‘auto-off’ symbol appears on the
screen.
4. To programme this function, press ‘P’.
5. The ‘auto-off’ symbol is displayed on the screen.
Press the ‘>’ button to increase the time from disconnection to one
hour, two hours, three hours and disconnection again.
By default, the coffee-maker will turn itself off at the programmed
time when no instructions are received.
6. To confirm your selection, press ‘P’.
To exit the programming mode, press ‘Esc’.
7. The coffee-maker is ready.
To Next Page
Loading...
Need help?
General
