EN
• Prepare the appliance according to the
function you wish to use:
FILLING WITH WATER:
• It is essential to have filled the tank with wa-
ter to be able to work with steam.
• Open the cover.
• Fill the tank, taking care to observe the MAX
level (Fig.1).
• Close water inlet lid.
• Use of scented water automatically cancels
the warranty
CVG9507 USE:
• Unroll the cable completely before plugging
it in.
• Connect the appliance to the mains.
• Once plugged in, the product will start to
heat up, during this heating period, do not
press the steam button, wait for the green
light to come on,
SMART:
• The product adapts to all types of fabric:
-
- Temperature for cotton. Y linen
• Wait until indicator (C) lights green, this
means that the appliance has reached tem-
perature, after its first warm-up.
• During use of the appliance, indicator (C)
will come on and off automatically to indicate
when it is using power and heating.
DRY IRONING:
• The appliance has a steam control trigger
(B) which, when set to off, allows dry ironing
(without steam) or with steam depending on
whether the trigger is pressed (Fig. 2).
STEAM IRONING:
• It is possible to iron with steam whenever
the tank is filled with water and the correct
temperature is selected.
VERTICAL IRONING:
• It is possible to iron hanging curtains, items
of clothing on their own hanger, etc. To do
so, follow these instructions:
• Iron from top to bottom,.
• Important: for cotton and linen, it is recom-
mended to put the base of the iron in con-
tact with the material. For other more deli-
cate fabrics, it is recommended to keep the
base of the iron a few centimetres away.
AUTO-OFF FUNCTION (STAND-BY):
CVG9507;
• For the purpose of saving energy, the appli-
ance switches to auto-off mode (stand-by)
after 8 minutes in the upright position or 30
seconds if left flat, assuming the user has
not performed any action during this peri-
od. 3 beeps will sound and the indicator will
flash RED GREEN alternately
• To resume ironing just touch the trigger or
move the iron.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
• Unplug the appliance from the mains.
• Drain the water out of the appliance.
• Clean the appliance.
CLEANING
• Disconnect the appliance from the mains
and allow it to cool before undertaking any
cleaning task.
• Clean the equipment with a damp cloth with
a few drops of washing-up liquid and then
dry.
• Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
• Never submerge the appliance in water or
any other liquid or place it under running
water.
HOW TO DEAL WITH LIME SCALE INCRUS-
TATIONS:
• For the appliance to work correctly it should
be kept free of limescale or magnesium in-
crustations caused by the use of hard water.
• To avoid this kind of problem it is advisable
to use distilled water.
• To prevent this kind of problem, we recom-
mend the use of water with low lime or mag-
nesium mineralisation.
• To do so, we recommend the use of the spe-
cific product for this kind of appliance, which
can be found in specialised shops and au-
thorised technical services.
• A specific anti-lime scale product should be
used on this kind of product.
• Home-made solutions, such as the use of
vinegar, are not recommended for descaling
this appliance.
To Next Page
Loading...
Need help?
General
