MAN-01-01052-1.5 2
Installation
1. Mount controller on a flat surface/wall using screws .
2. Connect cable of power adapter to controller.
3. Connect Ethernet cable between LAN port and LAN
router . For Wi-Fi connection, use SolarEdge GO app.
4. Download SolarEdge GO app.
Setting Up
1. Plug power adapter into AC outlet and wait until the
Power and Cloud LEDs are solid (about two minutes).
2. Start SolarEdge GO. Enter your site name > tap
>
Add > ONE Controller > follow on-screen instructions.
To Next Page
Loading...