SolarEdge Wi-Fi Kit - Page 9

SolarEdge Wi-Fi Kit Quick Installation Guide
MAN-01-00166-1.1
7
English
8 Scroll down to the Server Status screen, and check the Wi-Fi
status.
Server:Wi-Fi <S_OK>
Status: <OK>
If OK is not displayed, or there is an error/status message, refer
to Appendix A of the Wi-Fi Kit Installation Guide.
9 Scroll down to the Wi-Fi Status screen, and check the Wi-Fi
settings.
10 Wait for the inverter to connect to the SolarEdge monitoring
portal. This may take up to two minutes.
A message similar to the following appears on the LCD panel:
Vac[v] Vdc[v] Pac[w]
240.7 5.2V 0.0
<S_OK>
OFF
S_OK: Indicates that the connection to the SolarEdge
monitoring portal is successful. If S_OK is not displayed, refer to
Appendix A of the Wi-Fi Kit Installation Guide.
11 Close the inverter cover as described in its manual.
12 Turn the inverter ON/OFF switch to ON.