Need help?Do you have a question about the SOLARFOCUS PelletElegance 10 and is the answer not in the manual?
Key points for reliable and efficient operation of the heating system.
Ensures work is performed by qualified personnel for safe operation.
Covers access, safety devices, maintenance, and damage prevention.
Details requirements for maintenance, fuel quality, and heating system water.
Outlines conditions that void warranty and liability limitations.
Requirements for the installation space, including fire safety.
Guidance on chimney execution, condensate drainage, and connection rules.
Discusses preventing scale and corrosion through water quality management.
Explains RFB function and the role of the expansion tank.
Lists standard inclusions and available optional accessories.
Details optional extensions for room-sealed operation and flue gas pipes.
Visuals and dimensions for boiler and flue gas pipe configurations.
Comprehensive technical data, emissions, and EU regulation compliance.
Steps for preparing and positioning the boiler, including component removal.
Installing ball valves and setting up the optional room-sealed connection.
Procedures for removing outer panels and the display unit.
Installing the RS air distribution box and connecting the aluminium hose.
Establishing chimney connections and preparing flue gas pipes.
Guidelines for connecting and electrically earthing the pellet hose.
Information on installing hydraulic extensions and clamping ring fittings.
Correct positioning and alignment of servomotors and mixer shafts.
Description of the basic hydraulic setup for buffer charging.
Details of the extension pack for heating circuit 1 integration.
Details of the extension pack for heating circuit 2 integration.
Details of the extension pack for DHW tank charging.
Details of the extension pack for DHW charging without a buffer tank.
Details of the extension for heating circuits without DHW or buffer tank.
Overview of boiler hydraulic connections, filling, and venting procedures.
Connecting the safety valve blow-off line and installing thermal overload protection.
Specifies requirements for the heating system's power supply and connection.
Overview of connections on the power element.
Connecting the pellet conveyor system and installing the emergency OFF switch.
Details sensor resistance values and electrical fuse configurations.
Instructions for connecting the control unit to the internet.
Requirements and steps for initial boiler commissioning by qualified personnel.
Visual layout of the power element with terminal and fuse designations.
Overview of factory-installed electrical components for identification and replacement.
General| Type | Pellet Boiler |
|---|---|
| Nominal Output | 10 kW |
| Fuel Type | Wood Pellets |
| Power supply | 230 V / 50 Hz |
| Flue gas temperature | 120°C |
To Next Page
