Dyaco Canada Inc 2015 customerservice@dyaco.ca 12
MODE SELECT
Press the left hand key to select the SPEED, DIST, TIME or CLOCK at the bottom of the
display.
RESET/HEART RATE ALARM SELECT
1. Press the right hand key to activate the heart rate (this will
only register if you are wearing the chest strap which is sold
separately). If the alarm is on, the alarm icon will flash and
a beep will sound to indicate that your heart rate is either
above or below the selected target zone.
2. To clear exercise TIME, AVG SPEED, AVG PULSE,
DISTANCE, and KCAL, press the left key until TIME is
displayed, then press and hold the right key until data is
reset.
HEART RATE TARGET ZONES
1. Press the left hand key until
‘SPEED’ is displayed, then hold
the right hand key for 3 seconds.
The TIME will be flashing; press
the left hand key to select the
heart rate target zone settings.
2. Press the right hand key to
increase maximum heart rate limit.
After setting the maximum heart
rate, press the left hand key to adjust
the minimum heart rate limit.
To Next Page
Loading...
