Dyaco Canada Inc 2015 customerservice@dyaco.ca 15
DUAL FUNCTION PEDAL
Place your feet in between the aluminum surface of the pedal and the nylon foot strap that
wraps around it. If the opening is too narrow, depress the spring loaded clasp with one
hand and pull on the nylon strap with the other to increase the opening area. If it is too
loose or to tighten the strap, depress the spring loaded clasp, then pull on the open end of
the nylon strap until the strap is snug around each foot.
USING THE CLEAT PEDALS
Engage cleated shoes in pedals by placing cleat between bindings while pushing down.
Disengage by twisting heel outwards away from exercise bike.
Binding tension is adjustable and should be set so that cleat and shoe do not disengage
when pedaling. Use an Allen key to turn tension adjusting screws, clockwise to increase
binding tension, counterclockwise to decrease binding tension.
To Next Page
Loading...
