(4) SOUND mode Set
1---Sod3) 3 kinds of Sound running modes. Press ENTER to save the selection. Press
* Digital dis
UND running effects. 1 minute each time
ting
* Under [Soud]，press ENTER into SOUND running mode
* Press UP/DOWN to select (Sod
MENU to the previos selection.
play function details:
Sod1 Includes Sod2---Sod3 All SO
Sod2 R-G-B-W SOUND jumping
Sod3
R-BW-G-RW-B-GW-RGB-W-RB-GBW-RG-RBW-GB-RGW-RGBW 15colors SOUND jumping
Sod4
R-BW-G-RW-B-GW-RGB-W-RB-GBW-RG-RBW-GB-RGW-RGBW
15colors Sound color change strobe
Sod5 RGBW ALL LED sound strobe
(5) DMX mode Setting
eceived normally, it will display d.xxx (xxx: means DMX address)
(6) Master/Slave mode Setting
to Slave mode. Once Master unit links with Slave unit in good
LAu.
(7) DMX Channel Setting
Page 1
1
* Under [dxxx]，(xxx:001--512）press ENTER
into DMX512 setting mode
* Under DMX512 setting mode, press UP/DOWN to increase or decrease the address 001---512,
then press ENTER to save the setting. Press MENU to the previous setting.
* Once DMX512 signal can be r
* Under [SLAu]，press ENTER in
condition, LCD displays S
Ch
CH05
Sod1
Soud
Sod3
d001-d512
d001-d512
SLAu
CH08
To Next Page
Loading...