EasyManua.ls Logo

Solena Mini Par 12 - General Instructions; Safety Notice

Solena Mini Par 12
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General Instructions
Unpacking:
Thank you for purchasing this product. Please read user guide for safety and operations information before
using the product. Keep this manual for future reference. This product can create perfect light programs and
effects since it has passed a series of strictly tests before delivery. Please check the attachments listed on
the page after opening the carton. Immediately upon receiving a fixture, carefully unpack the box. Check the
box contents to ensure that all parts are present and that they are in good condition. If any part appears
damaged from shipping, or if the box shows signs of mishandling, notify the shipper immediately. In addition,
retain the box and all the packing material for inspection. In any event, save the carton and all packing
material because, in case that you have to return the fixture to the factory, you will have to do so in its
original box, with its original packing.
What is included: 1* Light, 1*Power Cable, 1*User Guide
Safety Notice:
Please read the following notes carefully because they include important safety information about the
installation, usage and maintenance of this product. It is important to read all these notes before starting to
work with this product.
There are no user serviceable parts inside the light. Any reference to servicing this unit you
may find from now on in this User Manual will only apply to properly C we certified
technicians. Do not open the housing or attempt any repairs unless you are one of them.
Please refer to all applicable local codes and regulations for proper installation of
the light.
Keep this manual for future consultation. If you sell the light to another user, make
sure that they also receive this manual.
Avoid direct eye exposure to the light source while the fixture is on. Always disconnect the light from its
power source before servicing. Always connect the light to a grounded circuit to avoid the risk of
electrocution.
Page 1