EasyManua.ls Logo

Solena Mini Par 12 - Page 3

Solena Mini Par 12
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This product is for indoor use only! Use only in dry locations. Keep this device away from rain and
moisture, excessive heat, humidity and dust. Do not allow contact with water or any other fluids, or
metallic objects.
Make sure there are no flammable materials close to the fixture(s) while operating.
Please prevent this light away from electrical shock
When hanging this fixture, always secure it to a fastening device using a safety cable (not
provided).
Always make sure that you are connecting the light to the proper voltage, as per the specifications in
this manual or on the product's sticker. Never connect the light to a dimmer pack. Make sure that the
power cable is not cracked, crimped or damaged. Never disconnect the fixture by pulling or tugging
on the power cable.
The maximum ambient temperature (Ta) is 104 F (40 C). Do not operate the fixture at a
higher temperature. In case of a serious operating problem, stop using this product
immediately!
Use cleaning tissue to remove the dust absorbed on the external lenses periodically to
optimize light output.
Always replace with the exact same type fuse, replacement with anything other than the
specified fuse can cause fire or electric shock and damage your unit, and will void your
manufactures warranty.
Do not remove or break the warranty label, otherwise it void the warranty.
There are no serviceable parts in the LED light. Please have all servicing and adjustments
made by a qualified service engineer.
Don’t throw this product away just as general trash, please dispose of this product following the
abandon electronic product regulation in your country.
To protect the environment, recycle packing material wherever possible.
Page 2