EasyManua.ls Logo

Solena Mini Par 12 - Troubleshooting

Solena Mini Par 12
13 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
annel CH06 or CH24press ENTER to save the selection. Press MENU to the previous
to increase/decrease sensitivity value 001—100, press ENTER to save the setting. Value increase,
sensitivity higher
* Under [CH]press ENTER into DMX512 channel setting.
* Press UP/DOWN to select ch
setting.
(8) Sound sensitivity setting
*Under [SEnS], press ENTER into Sound sensitivity setting
*Press UP/DOWN
Troubleshooting
1. If the power supply indicator doesn't light up and the light doesn't work, please check the power supply, the input
f the power supply indicator is light up and sound active indicator isn't light up, but the
d active, please increase the music volume or increase
e.
in slave mode.
.
. Make sure to take a good quality power cable and connection.
Warranty.
difications on the device or unauthorized operation by unqualified persons are not
ntee becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns electric shock,
tc.
After trying the above solution you still have a problem, please contact your dealer or our company for service.
Page 12
voltag
e and the fuse.
2. In Stand-Alone operation, i
light is shut off doesn't work.
A. Because sound is too small make for light shut off in soun
audio sensitivity with sensitivity knob, please check as below.
B. Please check if unit has been set up in slave mode, then set up in master mod
3. In Master-Slave operation, slave unit don't function, please check as below.
A. Make sure to there's only one master in the chain, and the others are set
B. Make sure to control the unit without DMX console controlling
C
Warranty Warnings:
1. Damages caused by the disregard of this user manual are not subject to
The dealer will not accept liability for any resulting defects or problems.
2. Please consider that unauthorized modifications on the device are forbidden due to safety reasons. Please note that
damages caused by manual mo
subject to warranty.
3. If this device will be operated in any way different to the one described in this manual, it may suffer damages and the
guara
e