Solid State Logic SSL G Series - Safety and Installation Considerations

-2-
Safety and Installation Considerations
This page contains denitions, warnings, and practical information to ensure a safe
working environment. Please take time to read this page before installing or using this
apparatus.
General Safety
• Read these instrucons.
• Keep these instrucons.
• Heed all warnings.
• Follow all instrucons.
• Do not use this apparatus near water.
• Do not expose this apparatus to rain or moisture.
• Clean only with dry cloth.
• Do not block any venlaon openings.
• Install in accordance with the rack manufacturer’s instrucons.
• There are no user-adjustments, or user-servicable items, on this apparatus.
• Adjustments or alteraons to this apparatus may aect the performance such
that safety and/or internaonal compliance standards may no longer be met.
• This apparatus is not to be used in safety crical applicaons
Caution
• This apparatus should not be used outside of the scope of API 500 series compable
racks.
• Do not operate this apparatus with any covers removed.
• To reduce the risk of electric shock, do not perform any servicing other than that
contained in these Installaon Instrucons unless you are qualied to do so. Refer all
servicing to qualied service personnel.
Installation
• Ensure power is removed from the rack before ng or removing this apparatus to
or from the rack.
• Use the panel xing screws supplied with the rack to secure this apparatus into the
rack.