SolidRun CuBox-i1 - CuBox-i Ports and Connections

Id Interface Description
1 Ethernet
Connect to your Ethernet switch or router for
local
wired networking (LAN).
2 DC Jack
Power inputs. User must connect a 5V limited
power supply
. See
further safety instructions.
3 Push Button This is a user
defined push button. User
application defines its functionality.
4 HDMI
Full HD HDMI output. Connect to your TV set.
5 MicroSD
MicroSD MUST be
operating system and application for proper
operation of the device.
6 Ethernet
indication LED
Off:
Indicates No link was established
Always on:
Indicates link is established
The indicator LED shares the IR receiver window .
:
note
I1-300-D,
I1W-300-D,
I2-300-D,
I2W
-
300
-
D
I2eX
I2eXw
I4P
Connect to your Ethernet switch or router for
wired networking (LAN).
Fast Ethernet
Gigabit
Ethernet
Power inputs. User must connect a 5V limited
. See
below safety notices for
further safety instructions.
Use 5V/2A
Use 5V/3A for
I4P
model
defined push button. User
application defines its functionality.
Supported
Supported
Full HD HDMI output. Connect to your TV set.
Supported
Supported
MicroSD MUST be
installed with proper
operating system and application for proper
operation of the device.
Supported
Supported
Indicates No link was established
Indicates link is established
Supported
Supported
The indicator LED shares the IR receiver window .
I2eX
-300-D,
I2eXw
-300-D,
I4P
-300-D
Gigabit
Ethernet
Use 5V/3A for
I4P
-300-D
model
Supported
Supported
Supported
Supported