EasyManua.ls Logo

SOLINTEG MHT-40K-100-P - User Manual

Default Icon
92 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Integ Hybrid Inverter
M
MHT-25/30/36/40/50K-100
MHT-40/50K-100-P
User Manual
ENGLISH VERSION

Table of Contents

Questions and Answers

  • C
    Christopher MillerAug 10, 2025
    What to do if my SOLINTEG Inverter shows a Grid Voltage Fault?
    • R
      Rachel MorrisAug 11, 2025
      If your SOLINTEG Inverter displays a Grid Voltage Fault, it means the inverter has detected that the grid voltage exceeds the safety limit. Here's what you can do: 1. Verify that the safety code is correct. 2. Ensure the AC cable wiring is properly connected. 3. If the voltage increase is due to high AC cable impedance, consider replacing it with a thicker cable. 4. With permission from the Electricity Authority, extend the voltage protection limit.
  • T
    Theodore ThompsonAug 18, 2025
    What to do if SOLINTEG Inverter says Mains Lost?
    • S
      Stephen GarciaAug 18, 2025
      If your SOLINTEG Inverter indicates 'Mains Lost', it could be due to a grid power outage or a disconnection in the AC circuit. Here's how to troubleshoot: 1. First, check if there is a general power outage in your area. 2. Then, verify that the AC breaker and terminal are securely connected.
  • M
    mendozathomasAug 26, 2025
    What to do if my SOLINTEG Inverter displays a Grid Frequency Fault?
    • D
      deleonmichaelAug 26, 2025
      If your SOLINTEG Inverter shows a Grid Frequency Fault, it means the grid frequency is outside the set protection range. Try these steps: 1. Check that the AC cable is correctly and securely connected. 2. If permitted by the local electricity company, switch to a country setting with a wider protection range.
  • L
    Leah WilliamsSep 2, 2025
    What to do if my SOLINTEG MHT-40K-100-P Inverter shows a DCI Fault?
    • M
      Monica KelleySep 2, 2025
      If your SOLINTEG Inverter displays a DCI Fault, which means the direct current injection value exceeds the acceptable range, here’s what you should do: 1. Restart the inverter. 2. If the issue persists, seek assistance from your installer or the manufacturer.

Summary

Safety Instructions

Safety Notes

Essential safety precautions and guidelines to follow during installation and operation of the inverter.

Statement

Outlines the conditions under which the manufacturer is not liable for damages or warranty claims.

Product Description

Operation Modes

Describes the different operational modes of the hybrid inverter, such as General, Peak load Shifting, UPS, Economic, and Off-grid.

Back-Up and Off-Grid Output

Installation

Location

Mounting the Inverter

External Ground Connection

Instructions for establishing a proper and safe external ground connection for the inverter.

Electrical Connection

Electrical Wiring Diagram

Presents the schematic diagram for the electrical wiring of the hybrid inverter system.

AC Connection

Covers the requirements and procedures for connecting the inverter to the AC power grid.

PV String Connection

Power Cable of the Battery Connection

Commissioning

Inspection Before Commissioning

Checklist of essential inspections to perform before starting the inverter commissioning process.

Commissioning Procedure

Step-by-step guide for the initial startup and commissioning of the inverter.

Stop the Inverter

Procedures for safely shutting down and stopping the inverter operation.

Operation

Advanced Setting

Country Code (Safety Code) Setting

Reactive Power

Troubleshooting

Error Message

Lists common error messages displayed by the inverter and their corresponding troubleshooting solutions.

Inverter Maintenance

Procedures and safety precautions for performing routine maintenance on the inverter.

Battery Maintenance

SOLINTEG MHT-40K-100-P Specifications

General IconGeneral
BrandSOLINTEG
ModelMHT-40K-100-P
CategoryInverter
LanguageEnglish

Related product manuals