3
Please charge the camera about 6-8 hours by plugging it
into a power source using the provided USB cable. After
connecting the camera with App, the App will indicate the
battery status.
Charging Your Camera
Before Installation
Insert SD card
Please format the SD card to FAT32 format (Application to
Windows system ONLY), then install the micro-SD card when
the camera is off. The camera only supports class 10 SD cards
with at least an 8GB capacity and a maximum capacity of 64GB
SD Card
(There's no indicator to show charging status
from the camera)
Note: When the camera was run out of battery, you need to
charge the camera by USB cable first and turn on the camera
by your hand.
To Next Page
Loading...