SOLIS 381 - Using the Hair Dryer

10
1. Plug the power cable 2 into a power outlet.
The appliance is now ready for use.
V USING THE HAIR DRYER
To use the hair dryer:
1. Set the ON/OFF and motor speed switch 9 to the desired level. The appliance
switches on.
2. Set the heating level switch 8 to the desired level. The appliance produces a cold
or hot air ow.
ON/OFF and motor speed
switch
Heating level switch
Appliance is switched o 0
Appliance is switched o 0 I
Appliance is switched o 0 II
Cold, motor runs slowly I
Warm, motor runs slowly I I
Hot, motor runs slowly I II
Cold, motor runs fast II
Warm, motor runs fast II I
Hot, motor runs fast II II
4
The appliance is equipped with a safety thermostat. The heating element
automatically switches o when the appliance overheats. The motor keeps running
to cool down the heating element. After a short break, the heating element
switches back on automatically. Ensure that the air inlets and outlets are completely
free from dust, dirt or lint. If necessary, clean the appliance with a soft, dry cloth.
4
The detangler prevents the power cord from twisting and tangling up while the
hairdryer is in use.