SOLIS 381 - Using the Cold Shot but Ton; Using the Hair-Styling Nozzle; Cleaning and Care; Storage

11
V USING THE COLD SHOT BUTTON
Use the cold shot button after drying and/or brushing your hair. To use the cold shot
button:
1. Press the cold shot button 7 to produce a cold air ow.
V USING THE HAIRSTYLING NOZZLE
To use the hair-styling nozzle:
1. Switch o the appliance.
2. Let the appliance cool down.
3. Put the hair-styling nozzle 1 onto the front of the appliance to attach the nozzle.
4. Use the appliance (see chapter Using the hair dryer).
5. Let the appliance cool down.
6. Remove the hair-styling nozzle 1 from the appliance.
V CLEANING AND CARE
We recommend cleaning the appliance regularly. To clean the appliance:
1. Switch o the appliance.
2. Unplug the power cable 2 from the power outlet.
3. Let the appliance cool down.
4. Clean the appliance with a slightly damp cloth.
5. Dry the appliance with a soft, dry cloth.
6. Rotate the hair lter 4 to the right and remove it from the appliance.
7. Clean the hair lter 4 with a brush.
6 Never replace the hair lter when it is wet under any
circumstances.
6 Never use the appliance without the hair lter attached.
8. Place the hair lter 4 back and rotate to the left to install it on the appliance.
V STORAGE
4
Use the hanging eyelet if you want to hang the appliance.
1. Store the appliance in a dry and enclosed space.