What does 'ARC- FAULT (1041 DATA:0000)' mean on my SOLIS S6-EH3P10K-H-EU Inverter and how can I fix it?
The error 'ARC- FAULT (1041 DATA:0000)' on your SOLIS Inverter indicates an arc fault. Verify connections are tight within your PV system. If further adjustment is necessary, arc fault settings can be changed in advanced settings.
What to do if my SOLIS S6-EH3P10K-H-EU displays 'Over-Load'?
If your SOLIS Inverter shows an 'Over-Load' error, it means the backup load power is too large, or an inductive load's startup power is too high. Try removing some of the backup load or disconnecting any inductive loads from the backup.
What does 'PV ISO-PRO01 (1033 DATA:0001)' mean on my SOLIS Inverter and how to fix it?
The error 'PV ISO-PRO01 (1033 DATA:0001)' on your SOLIS Inverter suggests a problem with PV string insulation. Check whether the PV strings have insulation problems and whether the PV cable is damaged.
What does 'OV-TEM (1032 DATA:0000)' mean on my SOLIS S6-EH3P10K-H-EU Inverter and how do I resolve it?
If your SOLIS Inverter displays 'OV-TEM (1032 DATA:0000)', it indicates a temperature issue. Check whether the surrounding environment of the inverter has poor heat dissipation and confirm whether the product installation meets the requirements.
What does 'OV-DC01 (1020 DATA:0001)' mean on SOLIS S6-EH3P10K-H-EU and how to fix it?
The error 'OV-DC01 (1020 DATA:0001)' on your SOLIS Inverter indicates an abnormal PV voltage. Check if the PV voltage is abnormal. If the issue persists, restart the system.
What does 'OV-Vbatt' mean on my SOLIS Inverter and how to solve it?
The 'OV-Vbatt' error on your SOLIS Inverter indicates an over-voltage issue with the battery. Verify the battery voltage is within the specified standards. Also, measure the battery voltage at the inverter connection point. If problems persist, contact your battery manufacturer for service.
How do I fix a 'CAN Fail' error on my SOLIS S6-EH3P10K-H-EU?
To address a 'CAN Fail' error on your SOLIS Inverter: - Check the cable conditions. - Ensure the cable is plugged into the CAN port of both the battery and the inverter. - Verify you are using the correct cable. - Note that some batteries require a special cable from the battery manufacturer.
What to do if my SOLIS S6-EH3P10K-H-EU displays 'Surge Alarm'?
If your SOLIS Inverter is showing a 'Surge Alarm', it indicates a grid side fault. Restart the device. If the problem continues, contact the manufacturer's customer service.
Why is my SOLIS S6-EH3P10K-H-EU showing 'OV-G-V01'?
The 'OV-G-V01' error on your SOLIS Inverter indicates a potential issue with the power grid or AC cable connection. First, check if the power grid is abnormal. Next, confirm that the AC cable is properly connected. If the issue persists, restart the system.
What does 'Off' mean on my SOLIS Inverter and how to fix it?
If your SOLIS Inverter is 'Off', turn on the device using the ON/OFF Setting.
General| Model | S6-EH3P10K-H-EU |
|---|---|
| Type | Hybrid Inverter |
| Rated Output Power | 10kW |
| Start Voltage | 180 V |
| Number of MPPT Trackers | 2 |
| Rated AC Output Power | 10kW |
| Max. AC Apparent Power | 11kVA |
| Nominal Grid Frequency | 50/60Hz |
| AC Output Frequency | 50/60Hz |
| Total Harmonic Distortion (THD) | <3% |
| Peak Efficiency | 98.4% |
| DC Switch | Yes |
| Protection Class | IP65 |
| Operating Temperature Range | -25°C to +60°C |
| Noise Level | <30 dB |
| Cooling Method | Natural Convection |
| Warranty | 5 years |
| Max. DC Input Power | 15kW |
| Max. Input Voltage | 1, 000 V |
| Input Voltage Range | 200 V - 1, 000 V |
| MPPT Voltage Range | 200-850V |
| Max. AC Output Power | 11kW |
| Max. Output Current | 16 A |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 310 V - 480 V |
| AC Output Voltage | 230V / 400V |
| Communication | WiFi |
| Humidity | 0% - 100% |
To Next Page
