To Next PageTo Next PageWhat does LmtByEPM mean on my SOLIS S6-EH3P10K-H-EU Inverter?
The LmtByEPM message on your SOLIS Inverter means that power may be limited by an external device. Confirm the inverter is connected to an external EPM/meter to prevent reverse current. Also, check if the inverter is controlled by a third-party device or if the inverter's power control setting is limited. You can verify settings in section 6.6.7 and check your meter readings.
How to troubleshoot a 'Fan Alarm' on my SOLIS S6-EH3P10K-H-EU?
If you receive a 'Fan Alarm' on your SOLIS Inverter, check whether the internal fan is working correctly or if it is jammed.
What does 'Off' mean on my SOLIS Inverter and how to fix it?
If your SOLIS Inverter is 'Off', turn on the device using the ON/OFF Setting.
Why is my SOLIS S6-EH3P10K-H-EU showing 'OV-G-V01'?
The 'OV-G-V01' error on your SOLIS Inverter indicates a potential issue with the power grid or AC cable connection. First, check if the power grid is abnormal. Next, confirm that the AC cable is properly connected. If the issue persists, restart the system.
What to do if my SOLIS S6-EH3P10K-H-EU Inverter displays ARC- FAULT (1041 DATA:0000)?
If your SOLIS Inverter shows the ARC- FAULT (1041 DATA:0000) error, verify that all connections within your PV system are tight. If further adjustments are necessary, arc fault settings can be changed in the advanced settings.
What does OV-Vbatt mean on my SOLIS S6-EH3P10K-H-EU?
The OV-Vbatt error on your SOLIS Inverter indicates an over-voltage issue with the battery. Verify the battery voltage is within the specified standards. Measure the battery voltage at the inverter connection point. If the problem continues, contact your battery manufacturer.
What does 'OV-ILLC (1052 DATA:0000)' mean on my SOLIS S6-EH3P10K-H-EU Inverter and how to resolve it?
If your SOLIS Inverter displays 'OV-ILLC (1052 DATA:0000)', it indicates an overload issue with the backup load. Check whether the backup load is overloaded. If the issue persists, restart the system.
What is 'LmtByVg' on my SOLIS S6-EH3P10K-H-EU Inverter and how do I handle it?
The 'LmtByVg' message on your SOLIS Inverter is triggered by local safety regulations when the grid voltage is high, activating Volt-watt working mode. Generally, this does not require intervention. However, if it's due to a factory test error, you can disable this mode via the LCD: Main menu ? Advanced Settings ? Password 0010 ? STD mode settings ? Working Mode ? Working mode: NULL ? Save and exit.
What does 'ARC- FAULT (1041 DATA:0000)' mean on my SOLIS S6-EH3P10K-H-EU Inverter and how can I fix it?
The error 'ARC- FAULT (1041 DATA:0000)' on your SOLIS Inverter indicates an arc fault. Verify connections are tight within your PV system. If further adjustment is necessary, arc fault settings can be changed in advanced settings.
What does 'PV ISO-PRO01 (1033 DATA:0001)' mean on my SOLIS Inverter and how to fix it?
The error 'PV ISO-PRO01 (1033 DATA:0001)' on your SOLIS Inverter suggests a problem with PV string insulation. Check whether the PV strings have insulation problems and whether the PV cable is damaged.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTE symbols used in the document.
Provides general safety guidelines for electrical installations and inverter operation.
Provides criteria for choosing a suitable installation location for the inverter.
Details the requirements and clearances for mounting the inverter.
Guides on how to prepare and connect the PV input cables to the inverter.
Guides on connecting the battery power cables to the inverter.
Introduces AC cable connections for grid and backup ports.
Details the preparation and connection of AC grid port cables.
Lists essential checks and preparations before commissioning the inverter.
Outlines the steps for commissioning the inverter after installation.
Lists common error messages and their troubleshooting suggestions.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTE symbols used in the document.
Provides general safety guidelines for electrical installations and inverter operation.
Provides criteria for choosing a suitable installation location for the inverter.
Details the requirements and clearances for mounting the inverter.
Guides on how to prepare and connect the PV input cables to the inverter.
Guides on connecting the battery power cables to the inverter.
Introduces AC cable connections for grid and backup ports.
Details the preparation and connection of AC grid port cables.
Lists essential checks and preparations before commissioning the inverter.
Outlines the steps for commissioning the inverter after installation.
Lists common error messages and their troubleshooting suggestions.
General| Model | S6-EH3P10K-H-EU |
|---|---|
| Type | Hybrid Inverter |
| Rated Output Power | 10kW |
| Start Voltage | 180 V |
| Number of MPPT Trackers | 2 |
| Rated AC Output Power | 10kW |
| Max. AC Apparent Power | 11kVA |
| Nominal Grid Frequency | 50/60Hz |
| AC Output Frequency | 50/60Hz |
| Total Harmonic Distortion (THD) | <3% |
| Peak Efficiency | 98.4% |
| DC Switch | Yes |
| Protection Class | IP65 |
| Operating Temperature Range | -25°C to +60°C |
| Noise Level | <30 dB |
| Cooling Method | Natural Convection |
| Warranty | 5 years |
| Max. DC Input Power | 15kW |
| Max. Input Voltage | 1, 000 V |
| Input Voltage Range | 200 V - 1, 000 V |
| MPPT Voltage Range | 200-850V |
| Max. AC Output Power | 11kW |
| Max. Output Current | 16 A |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 310 V - 480 V |
| AC Output Voltage | 230V / 400V |
| Communication | WiFi |
| Humidity | 0% - 100% |
