What should I do if my SOLIS Inverter shows UN-Vbatt?
If your SOLIS Inverter displays UN-Vbatt, restart the system to see if the fault clears. If the issue persists, it's recommended to contact the manufacturer's customer service for further assistance.
Why does my SOLIS S6-EH3P5K2-H Inverter show NO-Battery, and how do I fix it?
If your SOLIS Inverter shows NO-Battery, check the information page to verify that the battery voltage is within the specified standards. Also, measure the battery voltage at the plug.
How to fix grid overvoltage on SOLIS S6-EH3P5K2-H Inverter?
If your SOLIS Inverter is showing a grid overvoltage error, make sure the grid is correctly connected and then wait for the grid to return to normal operating levels.
What to do if my SOLIS S6-EH3P5K2-H Inverter displays ARC- FAULT (1041 DATA:0000)?
If your SOLIS Inverter shows the ARC- FAULT (1041 DATA:0000) error, verify that all connections within your PV system are tight. If further adjustments are necessary, arc fault settings can be changed in the advanced settings.
What does 'OV-Vbatt' mean on my SOLIS S6-EH3P5K2-H Inverter and how to solve it?
The 'OV-Vbatt' error on your SOLIS Inverter indicates an over-voltage issue with the battery. Verify the battery voltage is within the specified standards. Also, measure the battery voltage at the inverter connection point. If problems persist, contact your battery manufacturer for service.
What does Grid disturbance 02 mean on SOLIS Inverter?
A 'Grid disturbance 02' error on your SOLIS Inverter suggests a problem with the power grid or AC cable connection. Check if the grid is seriously distorted and ensure the AC cable is reliably connected.
What does LmtByEPM mean on my SOLIS Inverter?
If your SOLIS Inverter is showing 'LmtByEPM', confirm the inverter is connected to an external EPM/meter to prevent reverse current. Also, check if the inverter is controlled by an external third-party device and verify if the power setting of the inverter power control is limited. You may also need to verify settings in section 6.6.7 and check your meter readings.
How to troubleshoot battery overcurrent on SOLIS S6-EH3P5K2-H?
If your SOLIS Inverter is showing a battery overcurrent error, restart the inverter.
How to resolve Slave DSP Check Error on SOLIS Inverter?
If your SOLIS Inverter is showing a Slave DSP Check Error, restart the inverter.
What to do if SOLIS S6-EH3P5K2-H Inverter displays OV-ILLC (1052 DATA:0000)?
If your SOLIS Inverter displays OV-ILLC (1052 DATA:0000), it may be due to an overloaded backup load. Check whether the backup load is overloaded. If the problem continues, restart the system to see if the fault clears.
General| Model | S6-EH3P5K2-H |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 5 kW |
| Max. Input Voltage | 600 V |
| Number of MPPT Trackers | 2 |
| Rated AC Output Power | 5 kW |
| Max. AC Apparent Power | 5.5 kVA |
| Rated Grid Frequency | 50/60 Hz |
| Total Harmonic Distortion (THD) | <3% |
| Power Factor | 0.8 leading to 0.8 lagging |
| DC Switch | Integrated |
| Protection Degree (IP) | IP65 |
| Operating Temperature Range | -25°C to +60°C |
| Topology | Transformerless |
| Weight | 25 kg |
| Cooling Method | Natural Convection |
| Protection Class | Class I |
| Efficiency | 98.2% |
| Max. DC Input Power | 6.5 kW |
| MPPT Voltage Range | 90-550 V |
| Rated Grid Voltage | 230 V / 400 V |
| Grid Voltage Range | 180 V - 280 V |
| Communication | RS485, WiFi |
To Next Page