Need help?Do you have a question about the SOLIS S6-EH1P6K-L-PRO and is the answer not in the manual?
General| Model | S6-EH1P6K-L-PRO |
|---|---|
| Type | Hybrid Inverter |
| Rated Output Power | 6kW |
| Max. PV Input Voltage | 600 V |
| Start Voltage | 120 V |
| MPPT Voltage Range | 90-520 V |
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 14 A |
| Max. Output Current | 27.3 A |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
| Nominal Grid Frequency | 50/60 Hz |
| Total Harmonic Distortion (THD) | <3% |
| Power Factor | 0.8 leading to 0.8 lagging |
| DC Injection Current | <0.5% In |
| Euro Efficiency | 97% |
| MPPT Efficiency | 99.9% |
| Protection Degree | IP65 |
| Noise Level | <30 dB |
| Cooling Method | Natural Convection |
| Weight | 25 kg |
| Max. AC Apparent Power | 6600 VA |
| Peak Power | 6600 W |
| Operating Temperature Range | -25°C to +60°C |
| Communication | RS485, Wi-Fi |
| Max. DC Input Power | 9000 W |
Provides essential safety guidelines for electrical installations and inverter operation.
Guides on choosing an optimal location, considering environmental factors and safety.
Details the process and requirements for securely mounting the inverter, including clearances.
Summarizes the purpose and connection points for various cables (PV, Battery, AC).
Instructions for connecting PV cables, including DC terminal preparation and crimping.
Details on safely connecting battery cables to the inverter, including DANGER warnings.
Instructions for connecting AC power cables for grid and backup power to the inverter.
Configuring inverter time and selecting the connected battery model.
Configuring meter settings and selecting the appropriate grid code.
Setting the inverter's operating mode, such as Self-Use, Feed-in Priority, or Off-Grid.
Provides solutions for various error messages and operational issues encountered with the inverter.
Troubleshooting specific faults related to grid connection and battery status.
Solutions for DC input, bus, and communication system faults.
Addresses faults related to DC components, temperature, leakage, and grid disturbances.
To Next Page