To Next PageTo Next PageWhat to do if my SOLIS S5-GC60K-LV Inverter has no power?
If your SOLIS Inverter isn't powering on, verify the PV input connections are secure. Then, check the DC input voltage (it should be greater than 120V for single phase or greater than 350V for three phase systems). Finally, ensure that the PV positive and negative connections are not reversed.
Explanation of various safety symbols used in the manual.
Essential safety rules for installation and operation.
General information on electrical connections for the inverter.
Proper procedures for grounding the inverter.
How to connect the DC input from the PV array.
How to connect the AC output to the grid.
Procedure to select the correct grid standard for the installation country.
Steps to change the inverter's grid standard setting.
Guide for setting a custom grid standard if needed.
Step-by-step guide to safely start up the inverter.
Step-by-step guide to safely shut down the inverter.
Accessing advanced information and diagnostic data.
Accessing and configuring advanced technical settings.
Procedure for selecting or defining grid standards.
General