S5-GR3P(3-13)K
Expansion screw x4
Bracket
Fixing screw
Inverter
Quick Installation Guide
Version 1.0
Ginlong Technologies Co., Ltd.
2
Use a 10mm drill bit to drill a hole of 60mm depth.
Ensure the mounting bracket is horizontal and use a Phillips
screwdriver to fasten the expansion bolts.
Lift the inverter and hang it on the bracket.
Installation Clearance
Minimum clearance is required.
MC
MC
（+）
（-）
outer diameter
2.5-4 mm²
Use a wire crimper to fasten the metal connector and insert it
into the top of the MC4 connector. Use the MC4 special tool
to fasten the MC4 assembly.
outer diameter
2.5-4 mm²
Crimping plier
MC4 special tool
500mm
500mm
500mm
1
00
0mm
500mm
DC input
RS485
DC Switch
(optional)
AC output
DRM
CT/Meter
1
Bottom of the Inverter
Some models may have a different number of DC inputs,
please refer to datasheet/nameplate/actual product.
If no PV string connects to the DC input terminals, please install
the watertight cap onto the empty DC input terminals to guarantee
the inverter ingress protection rating.
Mounting Hole Size
3
Inverter Installation
4
5
DC Connector Wiring and Assemble
7±0.5mm
7±0.5mm
For access to the manual please scan
the QR code below or you can go the URL
https://www.ginlong.com/global/
service.html
After entering the page, you can click " "
icon to change to preferred language.
Note: Installation Manual Download
(For India)
To Next Page
Need help?
General