To Next PageTo Next PageWhat to do if my SOLIS S5-GC100K has no power?
If your SOLIS Inverter isn't powering on, verify the PV input connections are secure. Then, check the DC input voltage (it should be greater than 120V for single phase or greater than 350V for three phase systems). Finally, ensure that the PV positive and negative connections are not reversed.
General| Model | S5-GC100K |
|---|---|
| Rated Power | 100kW |
| Max. Input Voltage | 1100V |
| MPPT Voltage Range | 200-1000V |
| Number of DC Inputs per MPPT | 2 |
| Rated AC Output Power | 100kW |
| Max. AC Apparent Power | 110kVA |
| Rated Grid Voltage | 400V |
| Total Harmonic Distortion (THDi) | <3% |
| MPPT Range | 200-1000V |
| Output Voltage | 400V |
| Frequency | 50/60 Hz |
| Grid Frequency Range | 50/60 Hz |
| DC Injection Current | <0.5% of rated output current |
| Operating Temperature Range | -25°C to 60°C |
| Communication | RS485, Wi-Fi, GPRS (optional) |
| Protection Level | IP65 |
Explanation of safety symbols used in the manual for risk identification.
Essential safety guidelines and warnings for installation and use.
Detailed steps for mounting the inverter on walls or rack systems.
Procedures for making DC and AC electrical connections to the inverter.
Procedure to verify and select the correct grid standard for installation.
Step-by-step guide for safely starting up the inverter.
Step-by-step guide for safely shutting down the inverter.
