SOLIS S6-EH3P5K-H-AU - User Manual

Questions and Answers

D
david49Aug 31, 2025
What should I do if my SOLIS S6-EH3P5K-H-AU Inverter shows UN-Vbatt?
- J
  Jonathan WhiteAug 31, 2025
  If your SOLIS Inverter displays UN-Vbatt, restart the system to see if the fault clears. If the issue persists, it's recommended to contact the manufacturer's customer service for further assistance.
M
Mitchell GreenAug 25, 2025
Why does my SOLIS S6-EH3P5K-H-AU Inverter show NO-Battery, and how do I fix it?
- J
  Jane EspinozaAug 25, 2025
  If your SOLIS Inverter shows NO-Battery, check the information page to verify that the battery voltage is within the specified standards. Also, measure the battery voltage at the plug.
D
Dawn MorenoSep 23, 2025
What does Grid disturbance 02 mean on SOLIS S6-EH3P5K-H-AU Inverter?
- C
  carolynhuntSep 23, 2025
  A 'Grid disturbance 02' error on your SOLIS Inverter suggests a problem with the power grid or AC cable connection. Check if the grid is seriously distorted and ensure the AC cable is reliably connected.
L
Louis RogersSep 5, 2025
How to troubleshoot OV-TEM error on SOLIS S6-EH3P5K-H-AU Inverter?
- A
  Amy HayesSep 5, 2025
  If your SOLIS Inverter is showing an OV-TEM error, start by checking if the installation location meets the requirements specified in the user manual. Then, try to lower the ambient temperature around the inverter. After doing so, restart the inverter after fifteen minutes. If the error continues, contact the factory's customer service.
M
michaeldeleonSep 10, 2025
What does 'OV-Vbatt' mean on my SOLIS Inverter and how to solve it?
- J
  jennifernelsonSep 10, 2025
  The 'OV-Vbatt' error on your SOLIS Inverter indicates an over-voltage issue with the battery. Verify the battery voltage is within the specified standards. Also, measure the battery voltage at the inverter connection point. If problems persist, contact your battery manufacturer for service.
M
Mrs. Angela Robinson DDSSep 3, 2025
What does UN-TEM (103A DATA:0000) error mean on my SOLIS S6-EH3P5K-H-AU?
- J
  Joshua CobbSep 3, 2025
  If your SOLIS Inverter displays UN-TEM (103A DATA:0000), check the working environment temperature of the inverter. Restart the system to confirm if the fault continues.
K
Kristen RamosAug 29, 2025
What does LmtByEPM mean on my SOLIS Inverter?
- W
  William GarciaAug 29, 2025
  If your SOLIS Inverter is showing 'LmtByEPM', confirm the inverter is connected to an external EPM/meter to prevent reverse current. Also, check if the inverter is controlled by an external third-party device and verify if the power setting of the inverter power control is limited. You may also need to verify settings in section 6.6.7 and check your meter readings.
L
lewisjillSep 12, 2025
What does 'BatName-FAIL' mean on my SOLIS Inverter and how to resolve it?
- E
  Erin MyersSep 12, 2025
  If your SOLIS Inverter displays 'BatName-FAIL', confirm whether the battery model selection is consistent with the actual one.
S
Suzanne Pierce DVMSep 7, 2025
How to fix ILeak-Check error on SOLIS Inverter?
- D
  Donna HallSep 7, 2025
  If your SOLIS Inverter shows an ILeak-Check error, upgrade the software to the latest version. If the fault continues after the upgrade, contact the factory's customer service.
E
Erika DanielAug 27, 2025
What to do if SOLIS Inverter displays OV-ILLC (1052 DATA:0000)?
- A
  Andrea AliAug 27, 2025
  If your SOLIS Inverter displays OV-ILLC (1052 DATA:0000), it may be due to an overloaded backup load. Check whether the backup load is overloaded. If the problem continues, restart the system to see if the fault clears.