To Next Page
K
Kristen FordAug 25, 2025
How to turn on SOLIS S6-EH3P5K-H-AU?
- VVanessa WilsonAug 25, 2025
If your SOLIS Inverter is 'Off', turn on the device using the ON/OFF Setting.
How to turn on SOLIS S6-EH3P5K-H-AU?
If your SOLIS Inverter is 'Off', turn on the device using the ON/OFF Setting.
What to do if my SOLIS S6-EH3P5K-H-AU Inverter displays GRID-INTF02 (1046 DATA:0000)?
If your SOLIS Inverter displays GRID-INTF02 (1046 DATA:0000), confirm whether the grid is seriously distorted and check whether the AC cable is connected reliably.
Why does my SOLIS S6-EH3P5K-H-AU show a NO-Grid error?
If your SOLIS Inverter displays a NO-Grid error, first verify that the inverter is properly connected to the power grid. Next, check if the connected power grid is functioning normally. If the mains connection is normal, it is recommended to contact maintenance staff.
What to do if my SOLIS S6-EH3P5K-H-AU Inverter shows a Surge Alarm?
If your SOLIS Inverter displays a Surge Alarm, there may be a grid side fault. Restart the device. If the alarm persists after restarting, contact the manufacturer's customer service for assistance.
Why is my SOLIS Inverter showing OV-G-V01 error?
The OV-G-V01 error on your SOLIS Inverter could be due to an abnormal power grid or an improperly connected AC cable. First, check if the power grid is working correctly. Next, ensure the AC cable is properly connected. If the issue continues, restart the system to see if the fault clears.
What does LmtByEPM mean on my SOLIS S6-EH3P5K-H-AU Inverter and how to fix it?
The 'LmtByEPM' message on your SOLIS Inverter indicates a power limitation issue. Confirm the inverter is connected to an external EPM/meter to prevent reverse current. Also, check if the inverter is controlled by an external third-party device or whether the power setting of the inverter power control is limited.
What to do if SOLIS Inverter displays DCInj-FAULT (1037 DATA:0000)?
If your SOLIS Inverter shows a DCInj-FAULT (1037 DATA:0000) error, it could indicate an issue with the grid or AC cable connection. First, confirm that the grid is not abnormal. Next, ensure the AC cable connection is secure. If the problem persists, restart the system to see if the fault continues.
What does OV-TEM (1032 DATA:0000) mean on SOLIS Inverter?
The OV-TEM (1032 DATA:0000) error on your SOLIS Inverter suggests a temperature-related issue. Check the surrounding environment to ensure the inverter has proper heat dissipation. Also, confirm that the product installation meets the specified requirements.
What to do if SOLIS Inverter displays OV-ILLC (1052 DATA:0000)?
If your SOLIS Inverter displays OV-ILLC (1052 DATA:0000), it may be due to an overloaded backup load. Check whether the backup load is overloaded. If the problem continues, restart the system to see if the fault clears.
Why is my SOLIS S6-EH3P5K-H-AU Inverter showing OV-DC01 (1020 DATA:0001)?
The OV-DC01 (1020 DATA:0001) error on your SOLIS Inverter indicates a potential issue with the PV voltage. Check if the PV voltage is abnormal. If the issue persists, restart the system to confirm that the fault continues.
General