What does ARC- FAULT (1041 DATA:0000) mean on SOLIS S6-EH3P5K-H-AU Inverter and how to fix it?
The ARC- FAULT (1041 DATA:0000) error on your SOLIS Inverter indicates a potential arc fault. Start by verifying that all connections within your PV system are tight. If further adjustment is needed, arc fault settings can be changed in advanced settings.
What should I do if my SOLIS S6-EH3P5K-H-AU Inverter shows UN-Vbatt?
If your SOLIS Inverter displays UN-Vbatt, restart the system to see if the fault clears. If the issue persists, it's recommended to contact the manufacturer's customer service for further assistance.
What to do if SOLIS Inverter displays OV-ILLC (1052 DATA:0000)?
If your SOLIS Inverter displays OV-ILLC (1052 DATA:0000), it may be due to an overloaded backup load. Check whether the backup load is overloaded. If the problem continues, restart the system to see if the fault clears.
What does Fan Alarm mean on my SOLIS S6-EH3P5K-H-AU, and how can I fix it?
If your SOLIS Inverter displays Fan Alarm, check to see if the internal fan is working correctly or if it is jammed.
What does UN-TEM (103A DATA:0000) error mean on my SOLIS S6-EH3P5K-H-AU?
If your SOLIS Inverter displays UN-TEM (103A DATA:0000), check the working environment temperature of the inverter. Restart the system to confirm if the fault continues.
How to troubleshoot OV-TEM error on SOLIS S6-EH3P5K-H-AU Inverter?
If your SOLIS Inverter is showing an OV-TEM error, start by checking if the installation location meets the requirements specified in the user manual. Then, try to lower the ambient temperature around the inverter. After doing so, restart the inverter after fifteen minutes. If the error continues, contact the factory's customer service.
What does 'OV-Vbatt' mean on my SOLIS Inverter and how to solve it?
The 'OV-Vbatt' error on your SOLIS Inverter indicates an over-voltage issue with the battery. Verify the battery voltage is within the specified standards. Also, measure the battery voltage at the inverter connection point. If problems persist, contact your battery manufacturer for service.
Why does my SOLIS S6-EH3P5K-H-AU show a NO-Grid error?
If your SOLIS Inverter displays a NO-Grid error, first verify that the inverter is properly connected to the power grid. Next, check if the connected power grid is functioning normally. If the mains connection is normal, it is recommended to contact maintenance staff.
What to do if my SOLIS S6-EH3P5K-H-AU Inverter displays GRID-INTF02 (1046 DATA:0000)?
If your SOLIS Inverter displays GRID-INTF02 (1046 DATA:0000), confirm whether the grid is seriously distorted and check whether the AC cable is connected reliably.
Why does my SOLIS S6-EH3P5K-H-AU Inverter show NO-Battery, and how do I fix it?
If your SOLIS Inverter shows NO-Battery, check the information page to verify that the battery voltage is within the specified standards. Also, measure the battery voltage at the plug.
To Next Page
General