What to do if my SOLIS S6-EH3P5K-H-AU shows OV-G-V01 error?
If your SOLIS Inverter displays OV-G-V01 error, ensure the power grid is working normally and the AC cable is properly connected. If the issue continues after these checks, restart the system to see if the fault clears.
What to do if my SOLIS Inverter displays Over-Load?
If your SOLIS Inverter shows Over-Load, you need to reduce the amount of backup load or remove any inductive loads from the backup system.
What causes CAN Fail on my SOLIS S6-EH3P5K-H-AU Inverter and how can I fix it?
If your SOLIS Inverter is showing a CAN Fail error, check the cable conditions and ensure it is properly plugged into the CAN port of both the battery and the inverter. Verify that you are using the correct cable. Some batteries may also require a special cable from the battery manufacturer.
What does OV-Vbatt mean on my SOLIS S6-EH3P5K-H-AU Inverter, and how do I resolve it?
If your SOLIS Inverter displays OV-Vbatt, verify that the battery voltage is within the specified standards. Measure the battery voltage at the inverter connection point. If the issue persists, contact your battery manufacturer for further assistance.
What should I do if my SOLIS S6-EH3P5K-H-AU Inverter shows UN-Vbatt?
If your SOLIS Inverter displays UN-Vbatt, restart the system to see if the fault clears. If the issue persists, it's recommended to contact the manufacturer's customer service for further assistance.
How to fix BatName-FAIL error on SOLIS Inverter?
If your SOLIS Inverter shows BatName-FAIL, confirm that the battery model selection in the settings is consistent with the actual battery model connected.
What does Fan Alarm mean on my SOLIS S6-EH3P5K-H-AU, and how can I fix it?
If your SOLIS Inverter displays Fan Alarm, check to see if the internal fan is working correctly or if it is jammed.
What does DCInj-FAULT (1037 DATA:0000) mean on my SOLIS Inverter, and how do I troubleshoot it?
If your SOLIS Inverter displays DCInj-FAULT (1037 DATA:0000), ensure that the grid is not abnormal and that the AC cable connection is secure. If the problem persists, restart the system to see if the fault clears.
What does 'OV-DC01 (1020 DATA:0001)' mean on SOLIS S6-EH3P5K-H-AU Inverter and how to fix it?
To Next Page
General