6.Motion Sensor
Infrared human body
sensing mode:
When the sensor detects the
moving heat source, three
light heads will be turned on
and the motion sensor will
turn blue and stay for 5
seconds, indicating that the
sensor works properly.
Dawn to Dusk mode:
In this mode, the light fixture
will be switched to energy-
saving mode by decreasing
the lumen by 50% when
there is no moving heat
source detected within 10
minutes. If detected the heat
source, the light will return to
the normal brightness,
meanwhile the motion sensor
will turn blue and stay for 5
seconds.
- 7 -
To Previous Page
Loading...