EasyManua.ls Logo

Solo 635 ECO - User Manual

Solo 635 ECO
80 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Gebrauchsanweisung Motorsäge
Instruction manual chain saw
Instructions d'emploi tronçonneuse
Instrucciones de manejo motosierra
Gebruiksaanwijzing motorzaag
Istruzioni d'impiego motosega
635 ECO/ 6 3 6/ 6 4 3
Achtung: Lesen Sie vor der ersten Inbetriebnahme diese Ge-
brauchsanweisung gründlich durch und beachten Sie un-
bedingt die Sicherheitsvorschriften!
Important: Read this instruction manual carefully before
putting the chain saw into operation and strictly observe
the safety regulations!
Attention: Lire attentivement ce manuel avant la première
mise en service et observer absolument les prescriptions de
sécurité!
Atención: Es indispensable leer con mucha atención las
instrcciones de manejo antes de utilizar la motosierra por
primera vez.
¡ Preste especial atención a las recomendaciones de
seguridad!
Belangrijk: Lees voor de eerste inbedrijfname deze
gebruiksaanwijzing zorgvuldig door en neem alle
veiligheidsvoorschriften in acht.
Attenzione: Osservare attentamente le norme di sicurezza.
Errori nell'uso della motosega possono essere causa di
incidenti
9 636 108 07/2004

Table of Contents

Questions and Answers

  • J
    James WilsonAug 12, 2025
    Why Solo 635 ECO Chainsaw engine will not start?
    • R
      Robert LoganAug 12, 2025
      The Solo Chainsaw engine might fail to start or keep running due to several reasons: * Incorrect starting procedure. * A dirty spark plug or an incorrect distance between the electrodes. * A clogged air filter. For the first three issues, please consult the relevant chapters in the manual. For carburetion problems, contact your dealer.
  • J
    Joshua BrennanAug 17, 2025
    Why Solo 635 ECO engine gives off an excessive amount of smoke?
    • E
      Emily WarrenAug 17, 2025
      If your Solo Chainsaw engine emits too much smoke, it could be due to: * An incorrect fuel mixture. Ensure you prepare the fuel mixture according to the instructions. * Carburetion problems. In this case, contact your dealer.
  • M
    Michael TaylorAug 25, 2025
    What to do if Solo 635 ECO engine starts but is lacking in power?
    • K
      Kristine MendozaAug 25, 2025
      If the Solo Chainsaw engine starts but lacks power, it could be due to: * A clogged air filter. Clean or replace the filter. * Carburetion problems. Contact your dealer for assistance.
  • L
    Lee PonceAug 29, 2025
    What to do if Solo Chainsaw engine runs irregularly and lacks in power when revved?
    • F
      Fred HawkinsAug 29, 2025
      If the Solo Chainsaw engine runs irregularly and lacks power when revved, consider these potential causes: * A dirty spark plug or an incorrect distance between the electrodes. Check the spark plug. * Carburetion problems. Contact your dealer.
  • K
    Kaitlin ParkSep 5, 2025
    Why no oil is released from Solo 635 ECO?
    • A
      Adam DiazSep 5, 2025
      If no oil is released from your Solo Chainsaw, the issue might be: * Bad quality oil. Empty the tank, clean it and the pipes with liquid detergent, and then change the oil. * Lubrication holes are clogged. Clean them to restore oil flow.

Solo 635 ECO Specifications

General IconGeneral
BrandSolo
Model635 ECO
CategoryChainsaw
LanguageEnglish

Related product manuals