4 • FIRST-TIME TRACKING
Power on Camera and Tag early
Prepare the Tag
Tracking requires a strong GPS signal to work.
The stronger the signal, the better the tracking
will be.
Power on the Camera and Tag when first arriving
to your location in order to give SOLOSHOT3
a few minutes to acquire the best GPS signal
possible.
Make sure that your Tag is on and has a good GPS signal.
Finding a GPS signal can take up to 3 minutes.
STEP 1
STEP 2
IMPORTANT
After powering Tag on, place on a flat surface
with logo facing the sky. Do not keep in your
hand or put in a pocket or bag.
To Next Page
