Need help?Do you have a question about the Soloshot SOLOSHOT2 and is the answer not in the manual?
Access SOLOSHOT videos and tutorials online for product guidance.
Contact SOLOSHOT support via phone or email for assistance.
Detailed description of the SOLOSHOT2 Base unit components.
Detailed description of the SOLOSHOT2 Tag unit components.
List of accessories provided with the SOLOSHOT2 system.
Emphasizes understanding basic setup, pairing, and calibration before advanced settings.
Automatic tracking requires outdoor, wide-open spaces; Base must remain stationary.
Guidelines for rinsing and cleaning the Tag after use, especially in saltwater.
Guidelines for cleaning the Base using a dry cloth and compressed air.
Configures tilt behavior for different sports and shooting styles.
Adjusts tracking behavior for specific scenarios like Barrel or Jump Detection.
Controls automatic zoom and framing based on Tag proximity, requires Camera Controller.
Selects between tracking a single Tag or multiple Tags from the same Base.
Determines how the Base switches between multiple Tags (Closest, Fastest, Follow Me).
Controls video file creation (Cut vs. Continuous) when switching between Tags in Multi Mode.
Allows manual adjustment of the Base's tilt to center the subject on screen.
Specific calibration steps for the Big Altitude tracking mode.
Controls camera recording status (record/standby) via the Tag.
Turns off the Tag's radio to save battery or temporarily hide from the Base.
Enables Bases in Multi Mode to follow the Tag.
Stores a specific object's location in the Tag for calibration.
Sends commands to the camera to mark specific moments in the video.
Guides on pairing Bases and Tags to form a multi-device system.
Instructions on adding new Tags to an existing Tag or Base.
Steps to enable and configure Multi Mode on the Base for tracking multiple Tags.
Configuration options for how the Base tracks multiple Tags (Closest, Fastest, Follow Me).
Selection of recording modes (Cut vs. Continuous) for Multi Mode operation.
Setting up bases using standard calibration with the same Tag.
Setting up bases using a shared centering object for calibration.
Procedure for charging the SOLOSHOT2 Base unit via USB.
Procedure for charging the SOLOSHOT2 Tag by docking it to the Base.
Instructions to update the SOLOSHOT2 Base firmware using a USB drive.
Instructions to update the SOLOSHOT2 Tag firmware using a USB drive and the Base.
General| Type | Automatic Camera Tracking System |
|---|---|
| Mounting Options | Standard tripod mount |
| Compatibility | Cameras with a standard tripod mount |
| Tracking Range | Up to 2000 feet (610 meters) |
| Charging Time | 3 hours |
| Tracking Technology | RF-based tracking |
To Next Page
