Creating a Multi-Device System
You create a Unique System each time you pair a Base and Tag together by pressing their BUTTONS
simultaneously during setup and calibration. You can add more Tags (sold separately) to this Unique System by pairing
them to a Base or Tag that is already part of the system. A new Base or Tag may be added to the system by FIRST
pressing and holding the BUTTON of the device that is ALREADY part of the system and then pressing the
BUTTON on the device you wish to add.
TIP – If you press the + buttons in the wrong order you can correct the
mistake by re-pairing both to a device that is still part of the original system
NOTE: You must set each Base to Multi Mode if you want that Base to follow multiple Tags.
*
30
MULTI SYSTEMS
To Next Page
Loading...
