Manually Offset Your Centering Position
While in Surf & Turf Mode, your Base will automatically adjust its tilt to keep your feet on an imaginary line
separating the bottom third and middle third of the screen and centered horizontally. While in Big Altitude
Mode, your Base will automatically adjust its tilt to keep your Tag in the center of the screen. However, you can
use the PAN and TILT arrows to manually offset your position on the screen. For example, a kite boarder might
want to offset their position towards the bottom of the screen so that their kite is included in the shot.
ONLY ADJUST YOUR CENTERING AFTER YOU HAVE COMPLETED STEP 9.
NOTE: any vertical offsets you make will ONLY be present in the current tilt mode. For example: shifting
your position while in Surf and Turf Mode will not effect your position in Big Altitude Mode and vice versa.
*
22
ADVANCED SETTINGS - BASE
To Next Page
Loading...
