9
SELECTION OF TAP
Please select appropriate tap.
CONNECTION OF INLET HOSE, TAP AND WASHING MACHINE
1. Connection between ordinary tap and inlet hose.
2. Connection between screw tap and inlet hose.
Ordinary faucet
a) Loosen clamp nut
to show 5mm thread
tap with threads and inlet hose
e) Press slide bushing,
insert inlet hose into
connecting base
b) Loosen four bolts
special tap for washing machine
f) Connection nished
c) Set connecting base
on tap and tighten
bolts evenly
g) After connection and installation,
check if there is water leakage
d) Tighten clamp nut
Screw tap Special washing
machine tap
To Next Page
Loading...
Need help?
General
