Solter Hellmet Devil - Possible Anomalies; Irregular darkening of the filter; Filter does not darken or flicker; Slow filter response

POSSIBLE ANOMALIES
PROBLEM
POSSIBLE SOLUTIONS
Irregular darkening of the filter
The adjustment strap has been incorrectly positioned or the angle of the
helmet with respect to our vision area is not adequate.
Filter does not darken or flicker
The CR2450 or CR2032 (digital model) battery is exhausted. Replace it.
The front protective filter is damaged or in poor condition.
Slow filter response
Sensors are dirty.
The welding current is too low.
The working temperature is too low.
Insufficient vision
The front or rear protective filters are dirty.
Wrong protection index.
Insufficient light in the work environment.
EXPLODED VIEW
POS.
CÓDIGO
JOB
GUARDIAN
DEVIL
WELDER
ARMY
STEAMPUNK
R-10
R-20DI
R-10XL
1
10088
10086
2
05861
10188
30052
3
10089
10198
10087
4
05863
05863
5
05864
30051
6
06770
06771
06772
06773
10074
10300
10044
10170
10075
12