Need help?Do you have a question about the Solter Hellmet Devil and is the answer not in the manual?
General| Brand | Solter |
|---|---|
| Model | Hellmet Devil |
| Category | Welding Accessories |
| Language | English |
Setting the filter's darkness level based on application power.
Adjusts light intensity for filter transition from clear to dark.
Time for filter to return to clear state after welding.
Adjusts sensitivity, darkening, and delay parameters using +/- keys.
Switches between welding, cutting, and grinding modes.
Details on operating modes like welding, grinding, and plasma cutting.
Used for most welding applications with dimming function on.
Used for plasma cutting, darkening adjustable between 5 and 8.
Adjust harness depth for correct and stable head balance.
Adjust harness tightness by turning the knob on the back.
Modify distance between face and lens using outer nuts.
Adjust helmet lean by loosening knob and lifting tab.
Check strap position or helmet angle for correct vision area.
Replace battery or check sensors for dirt/damage.
Verify welding current, temperature, or sensor cleanliness.
Clean front/rear filters or check light levels in work environment.
To Next Page