Solwave SWA-T Series - Displays; Understanding Oven Displays

©2020 Solwave ovens
Lancaster, Pennsylvania,17603
Page 6 of 15
Part No. 20037909
Original Instructions
Displays
General Displays
READY
Ready displays when an oven
control will accept entries.
COOKING DISPLAYS
33:33 displays total cooking time.
When more than one cooking stage is
programmed, total time for all stages
displays. COOK displays when oven is
operating. DEFROST 20%, MEDIUM
50%, or MED-HI 70% will display to
indicate microwave power level being
used. HOLD 0% does not display
COOK. If oven power level is set to 0%,
oven does not heat for programmed
time. If no power level is displayed, the
microwave is operating at 100% power.
Cooking Displays
DISPLAYS DESCRIPTION
ready
"Ready" Displays when oven control will accept entries
OO:Oo
Displays cooking time. If stage cooking is programmed, total
cooking time is displayed.
hold 0%
defr 20%
MED 50%
med hi 70%
Displays the current microwave power level. .If no display is
shown, the oven is running at full power (100%)
power
“Power” Displays while the oven is generating microwave
energy during a cooking cycle.
Programming Displays
DISPLAYS DESCRIPTION
p:o
Displays when oven enters programming mode for single
digit keypad memory only.
p
Displays when oven enters programming mode for double
digit keypad memory. 2 keypads must be pressed to enter a
program.
op:
-−
Displays when oven is in user option mode. User options can
then be set or specied.
cf:
Displays with a numerical cooking factor when the X2
keypad is pressed. Cooking Factor is the percentage by
which cooking time increases when using X2 keypad to cook
multiple portions. (1=10%, 2=20%, 3=30%, etc.)
p:
--
1
Displays briey when programming a specic cooking stage.
Number (1 through 4) indicates the stage that is being
programmed.
The display is used for many di󰀨erent models of microwaves.
Depending on the model, certain words or symbols may never be highlighted or
become visible.