EasyManua.ls Logo

SOMFY Chronis Comfort RTS User Manual

SOMFY Chronis Comfort RTS
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation/programming
guide
Interior applications
Somfy InstalGuide IWC_A5_2016UK_11.indd 1 04-02-16 11:05

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the SOMFY Chronis Comfort RTS and is the answer not in the manual?

SOMFY Chronis Comfort RTS Specifications

General IconGeneral
Power SupplyBattery
Frequency433.42 MHz
Channels1
TypeTimer
CompatibilityRTS (Radio Technology Somfy)
Battery LifeApproximately 2 years
InstallationWall mounted

Summary

Power Connections for RTS Motors

RTS Motors: Basic Programming

Connecting and Initial Setup

Steps for connecting transmitter, checking rotation, and setting UP position.

Setting Preferred Positions

How to set and remove preferred 'my' positions for different blind types.

24V RTS Receivers: Programming

Programming via Receiver and Remote

Instructions for programming using the receiver and remote controls.

Modifying Preferred Positions

Adjusting 'my' positions for Tilt/Lift and Roll-up blinds.

Transmitter Management

Adding, removing, and replacing transmitters.

Factory Reset Procedures

Reset Methods

Various methods for performing a factory reset using buttons or transmitters.

Channel Grouping

Sonesse 40 WT Specific Settings

End Limit Adjustment

Setting and adjusting the upper and lower end limits for the motor.

Glydea Curtain Track Installation & Operation

Programming Glydea RTS Motors

Basic programming steps for Glydea RTS motors.

Setting Glydea Positions and Limits

Configuring preferred positions and end limits.

Glydea DCT System Configuration

Programming Glydea DCT

General programming instructions and motor rotation adjustment.

DCT Motor Reset and Settings

Resetting DCT motors and configuring touch/manual modes.

Glydea WT System Configuration

Programming and Motor Settings

Programming, motor rotation, and back release settings for WT.

WT Motor Reset and Wiring

Resetting WT motors and understanding wiring instructions.

Advanced Functions

Motor Rotation Direction

Modifying the motor's rotation direction.

Sonesse 30 DCT Advanced Settings

24V Wired Controls: Advanced Settings

Roll-Up Position Settings

Configuring preferred positions for roll-up applications.

Sunis RTS Sensor Setup

Thermosunis Indoor RTS Setup

Erasing the Sensor

Removing the sun sensor from the motor.

Chronis Smart RTS Operation

Chronis Comfort RTS Operation

Telis 6 Chronis RTS Transmitter

Moco DCE Programming

Setting End Limits

Configuring the end limits for motors connected to Moco DCE.

Related product manuals